BLRNG - GTC TONER MITA COPIERS GTC CODE, 318

  • MSDS: BLRNG
  • Manufacturer: GRAPHIC TECHNOLOGIES CORP
  • Product Name: GTC TONER MITA COPIERS GTC CODE, 318
  • National Stock Number: 6850-00N020553
Product Identification

Product ID:GTC TONER MITA COPIERS GTC CODE, 318
MSDS Date:07/29/1988
FSC:6850
NIIN:00N020553
MSDS Number: BLRNG

Responsible Party
GRAPHIC TECHNOLOGIES CORP
8022 DEERING AVE
CANOGA PARK, CA 91304-0006
US

Emergency Phone: 800-432-5162

Info Phone: 800-432-5162

Cage: 56489

Contractor
GRAPHIC TECHNOLOGIES CORP
CANOGA PARK, CA 91304-0006 US

Telephone: 800-432-5162

Cage: 56489

Ingredients

STYRENE ACRYLATE COPOLYMER

CAS: 25153-46-2

Fraction By Weight: 60-70%


STYRENE-ACRYLIC COPOLYMER

CAS: 25767-47-9

Fraction By Weight: 5-10%


POLYOLEFIN

CAS: 9017-48-5

Fraction By Weight: <5%


METAL COMPLEX AZO DYE

CAS: 85179-66-8

Fraction By Weight: 1%


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <10%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


SILICON DIOXIDE, AMORPHOUS; (AMORPHOUS SILICA)

CAS: 7631-86-9

Fraction By Weight: <1%

OSHA PEL 6 MG/M3 (TDUST)

ACGIH TLV: 10 MG/M3 (TDUST)


POLYVINYLIDENE FLUORIDE POLYMER

CAS: 24973-79-9

Fraction By Weight: <1%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IN CASE OF CONTACT, FLUSH WITH WATER FOR AT LEAST 15
MINUTES. SKIN: WASH WITH SOAP AND WATER. INHAL: REMOVE FROM
EXPOSURE. INGEST: DRINK TWO GLASSES OF MILK OR WATER AND CONTACT MD
OR POISON CON TROL CENTER.

Fire Fighting

Extinguishing Media:WATER, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AS WITH ALL ORGANIC DUSTS, THIS PRODUCT
MAY PRESENT AN EXPLOSION HAZARD IF HIGH DUST CONCENTRATIONS AND A
SOURCE OF IGNITION ARE PRESENT.

Accidental Release

Spill Release Procedures:COLLECT SPILLED MATERIAL WITHOUT CREATING
AIRBORNE DUST. SPRAY SPILL WITH WATER IF NECESSARY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE BELOW 95F.
Other Precautions:AVOID EYE CONTACT. AVOID BREATHING DUST.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Spec Gravity:1.0
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, SLIGHT ODOR.
Percent Volatiles by Volume:NONE

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO2, AND CARBON PARTICLES.
COMBUSTION PRODUCTS ARE TOXIC, AVOID.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE
REGULATIONS; FEDERAL, STATE & LOCAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.